INOXPA Tank Bottom Seat Valve NLF
The seat valves are actuated by a single- or double-acting actuator.
The shaft is actuated by the supplied compressed air and opens or closes the valve.
Possible configuration of the vlave: the valve seat opens into the valve to avoid accidental openings in case of overpressure in the line and to avoid possible contact with the product recovery scrapers.
Parts in contact with the product: AISI 316L
Other stainless steel parts: AISI 304
Gaskets: EPDM according to FDA 177.2600
Internal surface finish: Ra ≤ 0,8 µm
External surface finish: Bright polish
Total drainage prevents the stagnation of the product.
Normally closed valve (closed by spring) – standard version.
Normally open valve (opened by spring) by a simple turn of the pneumatic actuator.
The valve seat opens into the tank to avoid accidental openings in case of excessive pressure in the tank.
360º adjustable body, even after welding the flange to the tank.
Open lantern for visual inspection of the shaft sealing.
Easy disassembly by loosening the clamp
- Bottom_V..pdf (192 Downloads)